Skip to Content
  1. All Products
  2. All Products
  3. Aeroduct SCEET-10 Ducting 2-1/2 11Foot Piece
Select currency EUR
Aeroduct SCEET-10 Ducting 2-1/2 11Foot Piece

Image for illustration only. It may show a product series rather than the exact product offered.

Aeroduct SCEET-10 Ducting 2-1/2 11Foot Piece

https://www.roctexo.com/web/image/product.template/87690/image_1920?unique=1155db8
Part numbers : RX1-05-11858 , 00890101004 , 05-11858
Unit of Measure: EA

240.82 EUR / EA 240.82 EUR 240.82 € excl. VAT

240.82 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
7 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

Thermoid Aeroduct® SCEET-10 is a flexible, double-ply silicone-coated fibreglass ducting supplied as one full-length piece of approximately 3.4 m, with a nominal internal diameter of 63.5 mm.

The SCEET construction incorporates a supporting wire between the duct wall plies, providing a highly flexible duct suitable for routing around obstructions and sharp bends. It is intended for conveying hot or cold air and fumes in applications within its stated operating range of approximately -62 °C to +288 °C.

  • Manufacturer part number: 00890101004
  • Nominal internal diameter: 63.5 mm
  • Supplied length: approximately 3.4 m full-length piece
  • Double-ply silicone-coated fibreglass construction
  • Supporting wire positioned between duct wall plies
  • Not recommended for liquids, highly abrasive materials, or negative-pressure applications

Refer to the Thermoid Aeroduct® ducting information for manufacturer product guidance.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.