Skip to Content
  1. All Products
  2. All Products
  3. McFarlane Control Turn-To-Lock Dual 6Foot MCTL1014D072
Select currency EUR
McFarlane Control Turn-To-Lock Dual 6Foot MCTL1014D072

Image for illustration only. It may show a product series rather than the exact product offered.

McFarlane Control Turn-To-Lock Dual 6Foot MCTL1014D072

This is a special order item. Additional fees may apply. Please contact us for details.
https://www.roctexo.com/web/image/product.template/60158/image_1920?unique=182fd28
Part numbers : RX1-05-11257 , MCTL1014D072 , 05-11257
Unit of Measure: EA

212.00 EUR / EA 211.99551368326607 EUR 212.00 € excl. VAT

212.00 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The McFarlane MCTL1014D072 is a dual turn-to-lock control with a nominal 1.8 m (6 ft) conduit length. The turn-to-lock mechanism uses a quarter turn of the knob to lock or unlock the control at the selected position.

McFarlane identifies the MCTL1014D series as suitable for choke-control installations on dual-carburettor Rotax 912/914 series engines. Confirm the required configuration, routing, travel and installation eligibility against the applicable aircraft and engine documentation before fitting.

  • Dual-cable configuration
  • All-metal construction
  • High-temperature Teflon-lined wound conduit
  • Minimum control travel: 89 mm
  • Conduit outside diameter: 4.8 mm
  • Approximate maximum pull working load: 11 kgf; not designed for push loads
  • Panel fitting thread: 1/2-20 UNF

Part identification: McFarlane P/N MCTL1014D072; Roctexo P/N RX1-05-11257.

The supplied part number does not state the knob or cable-end configuration. Please verify these installation-specific details before purchase or fitment.

Manufacturer reference: McFarlane turn-to-lock choke controls.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.