476087 Facet Gold-Flo Fuel Pump

Part numbers : RX1-05-10832 , 476087N , 05-10832

Unit of Measure: EA

140.50 EUR / EA 140.5 EUR 140.50 € excl. VAT

140.50 EUR / EA excl. VAT

This combination does not exist.

Up to 15 EA ready to ship on Monday 2026-08-17

Order before 17:00 CET Tomorrow

1 EA available on request, fees apply

Special order from vendor stock.

Add to cart

The Facet® GOLD-FLO® 476087N is a solid-state electronic fuel pump for fuel-system applications where the specified pump configuration is required. The GOLD-FLO range uses solid-state circuitry and is designed for straightforward two-bolt mounting and routine service access.

Manufacturer part number: 476087N

12 V configuration
Published pressure range: 4.0–5.5 psi
Published flow rate: 36 US gal/h
Published inlet/outlet fitting: 1/8-27 internal NPT
Self-priming capability with published dry lift up to approximately 610 mm
Replaceable 74-micron filter and integral magnetic particle collection

Important: This product is not EASA/FAA approved. The manufacturer states that Facet®/Purolator® fuel pumps are not designed, tested or manufactured for aircraft applications. Verify all part-number, electrical, fuel-system and installation requirements before purchase or installation.

Documents

Wire Size Selection Chart (PDF)

Terms and Conditions

OEM PN	Volts	Part Number
476087E	12	05-10832

Overview

Note: Facet fuel pumps are not FAA approved and are not intended for aircraft use.

Fuel Compatibility:
All models of the Facet High Performance Gold-Flo Solid State Fuel Pumps are compatible with gasoline, diesel, biodiesel, blended alcohol fuels and fuel additives.

Reliability:
The new Gold-Flo Solid State Fuel Pump is an enhanced version of the Interrupter model. It has Solid State circuitry and will meet or exceed all performance specifications and is totally interchangeable. (These pumps have demonstrated an endurance life almost double that of the nearest competitor, according to test data).

Easy to Install-Easy to Service:
Two bolt mounting makes installations easy. Nothing to adjust. For best results, mount the pump close to the fuel tank and below the fuel level. The pump is self-priming to 24 inches vertical fuel lift. Vertical mounting is preferred to assure maintenance of rated pressures. The only service normally required is a simple cleaning of the filter and fuel inlet cavity.

Eliminates Vapor Lock:
When properly installed on most vehicles a constant, smooth, dependable supply of fuel under pressure is assured in the hottest weather or in high altitudes.

Features

12 - 24 inches dry lift
20 - 45 GPH
1 - 8 PSI
Transient Protection - 24 volt only
State of the art Electronics
Sealed Electronics
Built in Anti-Siphon Valve (Positive shut-off)
UL Certified
VCA Certified
Complies to Mil-std-461D
Replaceable 74 micron filter
Built in magnet to collect metal particles for additional filtration
1.6 amp average
Self Priming and Self Regulating
32 ounces and 5 inches
Corrosion Resistant over 100 hours of salt spray
Operating Temperature Range: -40F to 180F

Specifications

PN	OEM PN	Volts	PSI Max-Min	GPH	Fitting Size	Lift Min. Dry	Check Valve	Positive Shut Off Valve
05-10842	40007E	12	5.5-4.0	36	1/4"-18 Int.	24"	N	N
480545	40131E	12	5.5-4.0	34	1/8"-27 Int.	24"	N	Y
476088	476088	24	5.0-4.0	32	1/8"-27 Int.	24"	N	N
480543	480543	12	8.0-6.0	45	1/4"-18 Ext.	24"	N	N
05-10832	476087E	12	5.5-4.0	36	1/8"-27 Int.	24"	N	N
05-10833	476459E	12	8.0-6.5	32	1/8"-27 Int.	24"	N	N
05-10835	477060E	12	4.0-2.75	34	1/8"-27 Int.	24"	N	N
478360	478360E	12	5.5-4.0	36	1/8"-27 Int.	24"	N	N
05-00802	480534E	12	8.0-6.0	45	1/4"-18 Int.	24"	N	N
05-01003	480564E	24	5.0-4.0	32	1/4"-18 Int.	24"	N	Y

These products might also be of interest