Skip to Content
  1. All Products
  2. All Products
  3. Throttle Control McT100D072
Select currency EUR
Throttle Control McT100D072

Throttle Control McT100D072

https://www.roctexo.com/web/image/product.template/123956/image_1920?unique=d6b631d
Part numbers : RX1-05-04386 , MCT100D072 , 05-04386
Unit of Measure: EA

266.63 EUR / EA 266.63 EUR 266.63 € excl. VAT

266.63 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
1 EA ready to ship Tomorrow
Order before 15:30 CET Tomorrow
Up to 3 EA ready to ship on Thursday 2026-08-20
Order before 15:30 CET Tomorrow
1 EA available on request, fees apply
Special order from vendor stock.

The McFarlane Aviation MCT100D072 is a panel-mounted dual throttle control for Rotax 912/914 series engines with dual carburettors. Its dual-conduit design separates behind the instrument panel to support flexible cable routing without a separate splitter box.

This 1.83 m control features a standard barrel-shaped knob, a friction-lock mechanism, all-metal construction and a high-temperature PTFE-lined wound conduit. Heavy-duty 1 x 7 stainless-steel inner wires are provided for pull-load throttle operation.

  • Manufacturer part number: MCT100D072
  • Dual throttle control; nominal length: 1.83 m
  • Standard barrel-shaped knob
  • Maximum travel: 95 mm
  • Panel fitting: 1/2-20 UNF
  • Two adjustable conduit terminals: M6 x 1
  • Designed for pull loads only
  • Includes throttle hardware kit P/N 6408 and lightweight throttle return springs P/N 7140, as specified by the manufacturer

Important: The manufacturer states that this control is not for use on certified aircraft, flight controls or flight-control trim tabs. It is not EASA/FAA approved. Confirm suitability, installation details and applicable airworthiness requirements with qualified maintenance personnel before installation.

Contact Us

Terms and Conditions

Share

Overview

This panel mount throttle control for Rotax engines with dual carburetors allow a neat, clean throttle installation without a clunky splitter box. It features proven supersmooth friction lock, all metal construction, a Teflon™ liner, and heavy duty 0.062 inch stainless steel inner wires.

Behind the instrument panel, it splits into two conduits for easy and flexible routing. It's available in four, six, and eight foot lengths and is easily trimmed if required. Longer controls are also available up request.

Standard knob is egg shape and ball knob is sphere shape.

Specifications

  • Panel Fitting: 1/2-20 UNF x 0.67 inch thread
  • Slip Fit Conduit Terminals: 2 each with 1/4-28 UNF x 1.00 inch thread
  • Conduit: 0.188 inch OD Teflon™ lined wound conduit
  • Inner Wire: Heavy duty 0.062 inch diameter, 1x7 stainless steel twisted wire per MIL-DTL-87161
  • Travel (stroke): 3.75 inch maximum
  • Design Work Loads: Push- Not Applicable (designed for pull loads only) Pull- 10 lbs maximum
  • Typical Locking Force: 1 to 10 lbs (locking force dependent on friction lock engagement)
  • Operating Temperature: -65 to 450 F



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.