3/16 Nylaflow Tubing Type H
Part Number(s): 05-04355
Unit of Measure Name:
ft
Internal Reference:
RX1-05-04355
| Type | OD | ID | PSI | Part Number |
|---|---|---|---|---|
| High Bursting Pressure | 3/16 | .111 (appx.) | 2500 | 05-04355 |
Overview
| Nylon Polypenco. pressure tubing is a super tough, low friction, high flexibility tubing that can be used for cable protectors or in short pieces, as small bushings and washers. Suitable for use in oil, air, vacuum, fuel and low pressure hydraulic lines. It resists abrasion and wears better than aluminum or steel tubing. Has an extremely smooth inner surface with a very low coefficient of friction. Used for brake lines, and also as a conduit for the rudder cables in the Rutan VariEze and Long-EZ. Rated 1000 psi. Sold by the foot. Use Poly-Flo fittings with standard wall tubing. |
Note: Poly Flo fittings cannot be used with High Burst Pressure tubing.
Must use SAE fittings
Specifications
- Suggested Temp Range: -65°F to +150°F
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
These products might also be of interest
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.