Overview
| The kit is replaces the worn O-rings (2) on the primer pump used on non-fuel injected engine installations. The primer seals frequently are not re-lubricated until someone complains the primer isn't working or the engine is hard starting. This is most evident by the pump being hard or stiff to operate. Generally speaking, by the time the pump stops performing, the seals are worn (to the point that lube is of little value) and must be replaced. |
Application
- Beech 19/23 Series
- Cessna 120,140,150,152
- Cessna 170, 172, 175, 177
- Cessna 180, 182, 185
- Cessna 190, 195,
- Cessna 205, 206, 207
- Cessna 210
- Cessna 336, 337
- MK20 Series
- PA-24, PA-28, PA-28R, PA-44
In The Box
- 2- O-rings
- 1 packet of Seal Lube
- Detailed instructions
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
These products might also be of interest
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.