Skip to Content
  1. All Products
  2. All Products
  3. Saf-Air Fuel Drain Valve 1/4-18 NPT 2500H
Select currency EUR
Saf-Air Fuel Drain Valve 1/4-18 NPT 2500H

Image for illustration only. It may show a product series rather than the exact product offered.

Saf-Air Fuel Drain Valve 1/4-18 NPT 2500H

https://www.roctexo.com/web/image/product.template/123909/image_1920?unique=6ceff57
Part numbers : RX1-05-02689 , 2500H , 05-02689
Unit of Measure: EA

53.48 EUR / EA 53.48 EUR 53.48 € excl. VAT

53.48 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 6 EA ready to ship on Monday 2026-09-28
Order before 17:00 CET Tomorrow
Up to 8 EA ready to ship on Thursday 2026-10-01
Order before 17:00 CET Tomorrow
17 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The SAF-AIR 2500H is a lock-open fuel drain valve identified with a 1/4-18 NPT connection. Its push-to-test action supports fuel sampling, while the push-and-turn function allows the valve to be held open during fuel-system draining or inspection procedures.

Part number 2500H is part of SAF-AIR’s lock-open fuel drain valve range. The valve features a natural 360 brass body, double-sealed design and fuel-resistant Viton® O-rings. The valve is rebuildable, allowing replacement of the serviceable O-rings when required.

  • Manufacturer part number: 2500H
  • Connection: 1/4-18 NPT
  • Operation: push to test; push and turn to lock open
  • Material: 360 brass, natural finish
  • O-ring specification: M83248/1, size -006
  • Maximum pressure: 60 psi
  • Operating temperature: -51 °C to +127 °C
  • Manufacturer-listed approval: FAA TSO-C76

Confirm thread type, installation configuration and continuing-airworthiness requirements against the applicable approved maintenance data before installation.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.