Skip to Content
  1. All Products
  2. All Products
  3. Saf-Air Fuel Drain Valve 1/8-27 NPT CAV-110H-4
Select currency EUR

Saf-Air Fuel Drain Valve 1/8-27 NPT CAV-110H-4

https://www.roctexo.com/web/image/product.template/45991/image_1920?unique=feb0629
Part numbers : RX1-05-01934 , CAV-110H-4 , 05-01934
Unit of Measure: EA

56.20 EUR / EA 56.2 EUR 56.20 € excl. VAT

56.20 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 14 EA ready to ship on Thursday 2026-08-27
Order before 16:00 CET Tomorrow
Up to 46 EA ready to ship on Monday 2026-08-31
Order before 16:00 CET Tomorrow
55 EA available on request, fees apply
Special order from vendor stock.

The Saf-Air CAV-110H-4 is a push-type fuel drain valve for fuel-system servicing and sampling. It features a 1/8-27 NPT connection and is supplied with a 1/4 in (6.35 mm) hose end.

  • Manufacturer part number: CAV-110H-4
  • Push-type manual operation
  • Thread: 1/8-27 NPT
  • Hose end: 1/4 in (6.35 mm)
  • Material: 360 brass, natural finish
  • Fuel-resistant Viton® stem O-ring sealing arrangement against a flat valve seat
  • Maximum working pressure: 60 psi (approximately 4.1 bar)
  • Operating temperature: -51 °C to +127 °C
  • Manufacturer-listed FAA-PMA approval
  • Rebuildable valve design

The stem O-ring and flat-seat arrangement is designed to minimise dirt collection at the sealing area. Verify the correct part number, thread interface and installation eligibility against the aircraft’s applicable approved maintenance data before fitment.

Documentation: Saf-Air fuel drain valve information and Saf-Air approvals and certifications.

Contact Us

Terms and Conditions

Share

Overview

SAF-AIR push type fuel drain valves are close tolerance valves of simple design. These valves provide the most trouble free operation of any other line of valves in the industry. SAF-AIR valves are manufactured with an o-ring placed on the stem to seal against a flat seat on the body. This design eliminates an area where dirt can gather, thus putting an end to the main cause of fuel drain valve drip. FAA & PMA APPROVED.

Note: Aircraft applications are for general reference only. Verify correct valve for your aircraft before ordering.

MODEL CAV-110 1/8” NPT - For Cessna 310 tip tanks; Mooney Mark 20 and 20A; all Ercoupe models; Bellanca, Taylorcraft model B; Stinson 108, 108-1, 108-2, 108-3; Voyager model 10 and 10A; Navion; Waco VK series and UPF; and Sea Bee. Fits all standard gascolators.

Comes with 1/4" hose end

Features

  • Eight models in two styles with or without 1/4" hose adapter
  • All Valves can be rebuilt
  • Standard fuel resistant o-rings
  • Simple operation - just push to sample fuel

Specifications

  • MATERIAL: 360 Brass
  • FINISH: Natural
  • TEMPERATURE: -60° to +260°F (-51° to +127°C)
  • O-RINGS: All valves M83248/1 Size -006 CAV-170 Size -012, CAV-180 Size -011
  • PRESSURE: 60 PSI max
  • MODEL CAV-110 1/8" NPT For Cessna 310 tip tanks; Mooney Mark 20 and 20A; all Ercoupe models; Bellanca, Taylorcraft model B; Stinson 108, 108-1, 108-2, 108-3; Voyager model 10 and 10A; Navion; Waco VK series and UPF; and Sea Bee. Fits all standard gascolators.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.