Skip to Content
  1. All Products
  2. All Products
  3. Saf-Air Fuel Drain Valve 1/4-18 NPT CAV-160H-4
Select currency EUR
Saf-Air Fuel Drain Valve 1/4-18 NPT CAV-160H-4

Saf-Air Fuel Drain Valve 1/4-18 NPT CAV-160H-4

https://www.roctexo.com/web/image/product.template/63217/image_1920?unique=d6b631d
Part numbers : RX1-05-00966 , CAV-160H-4 , 05-00966
Unit of Measure: EA

56.40 EUR / EA 56.4 EUR 56.40 € excl. VAT

56.40 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
1 EA ready to ship Tomorrow
Order before 15:30 CET Tomorrow
Up to 9 EA ready to ship on Thursday 2026-08-20
Order before 15:30 CET Tomorrow
18 EA available on request, fees apply
Special order from vendor stock.

The Saf-Air CAV-160H-4 is a push-type fuel drain valve with a 1/4-18 NPT connection and a 1/4 in hose end. Its simple push operation supports fuel sampling and draining where specified by the applicable approved maintenance data.

Saf-Air designs this valve with an O-ring on the stem sealing against a flat seat in the body, a configuration intended to reduce areas where dirt may collect and contribute to drain-valve dripping.

  • Manufacturer part number: CAV-160H-4
  • Connection: 1/4-18 NPT
  • Hose end: 1/4 in
  • Material: 360 brass, natural finish
  • Standard fuel-resistant Viton® O-ring
  • Operating temperature: -51 °C to +127 °C
  • Maximum pressure: 60 psi
  • Rebuildable valve design
  • Manufacturer-listed FAA-PMA approval, Supplement 1

Please verify part-number suitability, installation configuration and regulatory acceptance for the specific aircraft or system before installation.

Contact Us

Terms and Conditions

Share

Overview

SAF-AIR push type fuel drain valves are close tolerance valves of simple design. These valves provide the most trouble free operation of any other line valves in the industry. SAF-AIR valves are manufactured with an o-ring placed on the stem to seal against a flat seat on the body. This design eliminates an area where dirt can gather, thus putting an end to the main cause of fuel drain valve drip. FAA PMA APPROVED.

Comes with 1/4" hose end.

Features

  • Eight models in two styles with or without 1/4" hose adapter
  • All Valves can be rebuilt
  • Standard fuel resistant o-rings
  • Simple operation - just push to sample fuel

Specifications

  • MATERIAL: 360 Brass
  • FINISH: Natural
  • TEMPERATURE: -60° to +260°F (-51° to +127°C)
  • O-RINGS: All valves M83248/1 Size -006 CAV-170 Size -012, CAV-180 Size -011
  • PRESSURE: 60 PSI max
  • CAV-100H-4, CAV-160H-4, CAV-170H-4, CAV-180H-4 All four models come with 1/4" hose end.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.