Skip to Content
  1. All Products
  2. All Products
  3. Vortex Generator Cessna 402C
Select currency EUR
Vortex Generator Cessna 402C

Image for illustration only. It may show a product series rather than the exact product offered.

Vortex Generator Cessna 402C

https://www.roctexo.com/web/image/product.template/117447/image_1920?unique=c5f6544
Part numbers : RX1-05-00609 , 05-00609
Unit of Measure: EA

3995.43 EUR / EA 3995.43 EUR 3,995.43 € excl. VAT

3995.43 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

Vortex Generator Kit for Cessna 402C

This Micro AeroDynamics Micro Vortex Generator (VG) kit is an aircraft-specific aerodynamic modification kit for the Cessna 402C. The system uses vortex generators and nacelle strakes to energise airflow over the applicable surfaces and support improved low-speed handling characteristics.

The kit comprises 118 vortex generators installed on the wings and both sides of the vertical stabiliser, plus four strakes for the inner and outer engine nacelles. Components are supplied with installation tools, computer-cut positioning templates, detailed illustrated drawings, installation instructions and Loctite® AA 330™ adhesive.

  • Application: Cessna 402C
  • Manufacturer: Micro AeroDynamics Inc.
  • Approval references: FAA STC SA5131NM and EASA STC 10050010
  • Includes an approved Pilot’s Operating Handbook Supplement (POHS), according to the manufacturer
  • Roctexo part number: RX1-05-00609

Installation and continued airworthiness should be performed in accordance with the applicable approved data and the manufacturer’s supplied documentation.

Manufacturer documentation: Micro AeroDynamics Cessna 402C product information and Cessna 402C catalogue sheet.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.