Skip to Content

Del Fitting Seal 3/8 OD Aluminum

https://www.roctexo.com/web/image/product.template/123830/image_1920?unique=7119380
Part numbers : RX1-04-05006 , DY90-A-6 , 04-05006
Unit of Measure: EA

1.82 EUR / EA 1.82 EUR 1.82 € excl. VAT

1.82 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
25 EA ready to ship on Monday 2026-08-10
Order before 15:30 CET on Monday 2026-08-10
Up to 269 EA ready to ship on Thursday 2026-08-13
Order before 15:30 CET on Monday 2026-08-10
Up to 410 EA ready to ship on Monday 2026-08-17
Order before 15:30 CET on Monday 2026-08-10
656 EA available on request, fees apply
Special order from vendor stock.

Aluminium DEL fitting seal, manufacturer model DY90-A-6, for 3/8 in (9.5 mm) outside-diameter tube and dash 6 fittings.

Designed for use at AN, MS and JIC 37° flared fitting interfaces. DEL fitting seals are intended to help address leakage associated with scratched sealing surfaces, unsuitable tube-end finishes or incorrect tightening, in both high- and low-pressure applications.

  • Tube outside diameter: 3/8 in (9.5 mm)
  • Fitting dash size: 6
  • Material: aluminium
  • Manufacturer part number: DY90-A-6
  • Unit of measure: each

Please confirm the required tube size, fitting configuration and maintenance data before installation.

Tube Size O.D.Fitting Dash SizePart No.
3/8604-05006

Overview

DEL fitting seals are designed to eliminate leakage due to scratches on the sealing surface, improper torquing, or poor finishes on tube ends, in high or low pressure applications. For use with AN, MS, and JIC 37° flared fittings, DEL fitting seals also reduce tube flare cracking by reducing torque needed, eliminating nose damage to the fitting, and allow reuse of hardware. Approved by NASA, SAE, Air Force, Army, Navy, and major aerospace contractors.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.