Skip to Content
  1. All Products
  2. All Products
  3. 4130 Sheet 6 X 12 X .125
Select currency EUR
4130 Sheet 6 X 12 X .125

Image for illustration only. It may show a product series rather than the exact product offered.

4130 Sheet 6 X 12 X .125

https://www.roctexo.com/web/image/product.template/51645/image_1920?unique=603dab8
Part numbers : RX1-03-55300 , 03-55300
Unit of Measure: EA

23.25 EUR / EA 23.25 EUR 23.25 € excl. VAT

23.25 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
2 EA ready to ship Tomorrow
Order before 15:30 CET Tomorrow
Up to 62 EA ready to ship on Thursday 2026-10-29
Order before 15:30 CET Tomorrow
Up to 98 EA ready to ship on Monday 2026-11-02
Order before 15:30 CET Tomorrow
3 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

4130 chromium-molybdenum alloy steel sheet for fabrication work where a compact, nominal 152 x 305 x 3.2 mm sheet format is required.

4130 steel is widely used for fabricated parts and components due to its combination of weldability, ease of fabrication and mild hardenability. It can respond to heat treatment for higher strength where an appropriate process is specified.

  • Roctexo part number: RX1-03-55300
  • Material: 4130 chromium-molybdenum alloy steel
  • Nominal sheet dimensions: 152 x 305 x 3.2 mm
  • Unit of measure: each
  • Listed weight: 1.225 kg

Please confirm the required material condition, specification, certification and traceability requirements before use in a regulated aviation application.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

ThicknessSize
(in.)		Part No.
.1256 x 1203-55300

Overview

4130 STEEL SHEETS
MIL-S-6345A NORMALIZED
Formerly MIL-S-18729C
This chromium-molybdenum alloy is one of the most widely used aircraft steels because of its combination of weldability, ease of fabrication and mild hardenability. It will respond to heat treatment to high strength levels and yet, in the annealed condition, it has adequate strength for many applications. Used for the manufacture of parts and components.

Tensile strength 75,000-85,000 PSI.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.