Skip to Content
  1. All Products
  2. All Products
  3. T-88 Adhesive 1/2 Pint Packs
Select currency EUR
T-88 Adhesive 1/2 Pint Packs

T-88 Adhesive 1/2 Pint Packs

https://www.roctexo.com/web/image/product.template/90769/image_1920?unique=5c56e72
Part numbers : RX1-02-00046 , 1100K10 , 02-00046
Unit of Measure: EA

25.46 EUR / EA 25.46 EUR 25.46 € excl. VAT

25.46 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
1 EA ready to ship Today
Order before 15:30 CET Today
Up to 23 EA ready to ship on Thursday 2026-09-03
Order before 15:30 CET Today
Up to 30 EA ready to ship on Monday 2026-09-07
Order before 15:30 CET Today
45 EA available on request, fees apply
Special order from vendor stock.

System Three T-88 is a high-performance, two-part structural epoxy adhesive supplied in a 1/2-pint pack (approximately 237 ml total system). This non-brittle, solvent-free adhesive is formulated for durable bonding of wood, metal and composite materials.

The adhesive uses a simple 1:1 mix ratio by volume and offers a working time of approximately 45 minutes at 21°C. It can be applied at temperatures down to 2°C and cures without shrinkage in normally fitted joints.

  • Manufacturer: System Three
  • Manufacturer part number: 1100K10
  • Two-part structural epoxy adhesive
  • 1:1 mix ratio by volume
  • Approximate working time: 45 minutes at 21°C
  • Minimum application temperature: 2°C
  • Suitable for bonding wood, metal and composites
  • Waterproof after cure

For handling, surface preparation, mixing and curing guidance, consult the System Three technical data sheets. Use only where permitted by the applicable maintenance data and engineering requirements.

Contact Us

Terms and Conditions

Share

Overview

Note: Two part system, quantities will be combined amount of part A and part B. For example, for the gallon size, part A will be 1/2 gallon and part B will be 1/2 gallon totaling 1 gallon.

T-88 is a non-brittle structural adhesive which gives superior finished results even when used under adverse working conditions. T-88 will cure in temperatures as low as 35°F which makes it an excellent choice for homebuilders living in colder climates. It is recommended by the builders of many types of homebuilt aircraft and is excellent for bonding aluminum, steel or wood. When fully cured, it is not affected by water, oil, gasoline and most other chemicals.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.