Skip to Content
  1. All Products
  2. All Products
  3. West System Epoxy Kit B-2 Slow
Select currency EUR
West System Epoxy Kit B-2 Slow

West System Epoxy Kit B-2 Slow

Hazardous product
Hazardous material Special shipping rules and carrier restrictions may apply.
https://www.roctexo.com/web/image/product.template/10768/image_1920?unique=f44bdbd
Part numbers : RX1-01-08400 , 01-08400
Unit of Measure: EA

993.87 EUR / EA 993.87 EUR 993.87 € excl. VAT

993.87 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
9 EA available on request, fees apply
Hazardous material special order from vendor stock.

The WEST SYSTEM B-2 Slow Epoxy Kit combines 105 Epoxy Resin with 206 Slow Hardener for general bonding, coating and composite applications where a longer working and cure time is beneficial. The 206 Slow Hardener is intended to provide adequate working time in higher workshop temperatures.

When mixed at the specified 5:1 resin-to-hardener ratio by volume, the 105/206 system cures to a rigid, high-strength, moisture-resistant bond with bonding and barrier-coating properties. 206 Slow Hardener is not intended for clear coating.

  • Kit designation: B-2 Slow
  • Nominal kit size: approximately 4.5 L
  • System components: WEST SYSTEM 105 Epoxy Resin and 206 Slow Hardener
  • Mix ratio: 5 parts resin to 1 part hardener by volume
  • Suitable where extended handling time is required for coating, bonding or composite work
  • Dispensing pumps are not included

Refer to the current WEST SYSTEM technical data sheet, user manual and applicable safety data sheets before use. Confirm suitability against the relevant maintenance data and project requirements. No EASA/FAA approval or aircraft-specific compatibility information is provided with the available product data.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.