Skip to Content
  1. All Products
  2. All Products
  3. West System Epoxy Kit A-1 Fast
Select currency EUR
West System Epoxy Kit A-1 Fast

West System Epoxy Kit A-1 Fast

Hazardous product
Hazardous material Special shipping rules and carrier restrictions may apply.
https://www.roctexo.com/web/image/product.template/51033/image_1920?unique=f44bdbd
Part numbers : RX1-01-08100 , 01-08100
Unit of Measure: EA

472.93 EUR / EA 472.93 EUR 472.93 € excl. VAT

472.93 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
20 EA available on request, fees apply
Hazardous material special order from vendor stock.

WEST SYSTEM Epoxy Kit A-1 Fast is a two-part epoxy system comprising 105 Epoxy Resin and 205 Fast Hardener. It is intended for general bonding and coating tasks where a relatively rapid cure is required.

When mixed at the specified 5:1 resin-to-hardener ratio by volume, the 105/205 system produces a high-strength, rigid and moisture-resistant cured epoxy with bonding and barrier-coating properties. The low-viscosity resin is designed to wet out wood fibres, fibreglass and reinforcing fabrics, and may also be used with suitable WEST SYSTEM fillers for gap filling and fairing applications.

  • Kit designation: A-1 Fast
  • Contents stated for this kit: 105 Resin, 946 ml; 205 Fast Hardener, 207 ml
  • Mix ratio: 5:1 by volume, resin to hardener
  • Typical pot life: 10–15 minutes at 25°C
  • Typical cure to solid state: 5–7 hours at 21°C
  • Minimum recommended working temperature: 5°C

Follow the applicable WEST SYSTEM instructions and safety documentation before use. This product is classified as hazardous for transport.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.