Skip to Content
  1. All Products
  2. All Products
  3. Onex Tailwheel Hardware Kit
Select currency EUR
Onex Tailwheel Hardware Kit

Image for illustration only. It may show a product series rather than the exact product offered.

Onex Tailwheel Hardware Kit

https://www.roctexo.com/web/image/product.template/108716/image_1920?unique=430f464
Part numbers : RX1-01-01191 , 01-01191
Unit of Measure: EA

14.92 EUR / EA 14.92 EUR 14.92 € excl. VAT

14.92 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
83 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The Onex Tailwheel Hardware Kit is a packaged hardware set for the tailwheel installation of an Onex aircraft project. Supplied as one kit, it brings together the specified bolts, nuts, washers and cotter pins for convenient parts identification during assembly or maintenance.

Kit contents as listed:

  • 1 × AN23-10 drilled clevis bolt
  • 1 × AN23-11 drilled clevis bolt
  • 2 × AN310-3 castle nuts
  • 2 × AN365-428A elastic stop nuts
  • 1 × AN365-624A elastic stop nut
  • 1 × AN4-12A undrilled bolt
  • 1 × AN4-14A undrilled bolt
  • 1 × AN960-10 flat washer
  • 3 × AN960-10L flat washers
  • 2 × AN960-416 flat washers
  • 2 × MS24665-132 cotter pins

Confirm the required configuration against the applicable aircraft plans and maintenance documentation before installation.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.