Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

SCEET-24 Ducting 6 13Ft

https://www.roctexo.com/web/image/product.template/52560/image_1920?unique=8ef9bbe
Part numbers : RX1-05-30624-13 , 05-30624-13
Unit of Measure: EA

451.74 EUR / EA 451.74 EUR 451.74 € excl. VAT

451.74 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
1 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

SCEET-24 is flexible, high-temperature ducting with a nominal 6 in (152 mm) internal diameter, supplied in a 13 ft (approximately 4 m) length.

The ducting is constructed with silicone-coated fibreglass reinforcement and a non-visible steel wire incorporated within the hose wall. This provides a flexible duct solution for high-temperature gas conduction, extraction of exhaust fumes close to the ejection area, and protection of electrical cables routed through very hot areas.

  • Product designation: SCEET-24
  • Nominal internal diameter: 6 in (152 mm)
  • Supplied length: 13 ft (approximately 4 m)
  • Construction: two fibreglass reinforcements with high-temperature silicone rubber and internal steel-wire support
  • Operating temperature range: -55 °C to +260 °C; short-duration exposure up to +300 °C stated for the ducting series
  • Roctexo part number: RX1-05-30624-13

Please confirm the required diameter, length and installation suitability before ordering.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.