Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Poly-Fiber Mark II 208 Olive Drab Quart

https://www.roctexo.com/web/image/product.template/40132/image_1920?unique=8ef9bbe
Part numbers : RX1-09-03947 , 09-03947
Unit of Measure: EA

204.76 EUR / EA 204.76 EUR 204.76 € excl. VAT

204.76 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
1 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

Poly-Fiber Mark II 208 Olive Drab is a two-part catalysed topcoat paint supplied in a quart format. Developed for application over suitably primed metal or composite parts, it provides a tough, long-lasting painted finish in 208 Olive Drab.

Mark II for Metal is not for use on fabric. Do not apply it to structures that will be fabric-covered using New Super Seam or Poly-Tak cement, as these materials may lift the coating.

  • Colour: 208 Olive Drab
  • Format: Quart
  • For primed metal and composite parts
  • Two-part paint system mixed at one part paint to one part Mixing Liquid
  • May be thinned with Mark II Thinner if required to reduce orange peel
  • Typical application: two or three spray coats, applied approximately one hour apart

Follow the applicable Poly-Fiber product instructions and observe suitable paint-handling and spray-safety practices.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.