Skip to Content
  1. All Products
  2. All Products
  3. Pilot 2 Place Intercom PA-200T
Select currency EUR
Pilot 2 Place Intercom PA-200T

Image for illustration only. It may show a product series rather than the exact product offered.

Pilot 2 Place Intercom PA-200T

https://www.roctexo.com/web/image/product.template/26942/image_1920?unique=8ef9bbe
Part numbers : RX1-11-02712 , PA-200T , 11-02712
Unit of Measure: EA

188.93 EUR / EA 188.93 EUR 188.93 € excl. VAT

188.93 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 1 EA ready to ship on Thursday 2026-11-12
Order before 16:00 CET on Tuesday 2026-11-10

The Pilot USA PA-200T is a compact, portable two-station VOX intercom for pilot and co-pilot headset communication. Independent volume controls and adjustable squelch allow each user to set a suitable listening level while helping limit unwanted cockpit noise between transmissions.

  • Portable two-place intercom with voice-activated (VOX) operation
  • Independent pilot and co-pilot volume controls
  • Adjustable squelch circuit
  • Cellular/satellite phone interface with 2.5 mm connection
  • Fail-safe mode for continued reception of ATC transmissions at reduced volume if the battery fails
  • Powered by one 9 V alkaline battery; stated operating time is approximately 25–30 hours
  • Headphone interface: PJ-055B; microphone interface: PJ-068
  • Supports up to two portable push-to-talk switches; switches are sold separately
  • Can be expanded to four stations with the optional PA-200E expansion module

Manufacturer part number: PA-200T.

Documentation: PA-200T Operational Guide (PDF).

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.