Skip to Content
  1. All Products
  2. All Products
  3. Mil-Dtl-6000D Oil & Coolant Hose 1/2 Id
Select currency EUR
Mil-Dtl-6000D Oil & Coolant Hose 1/2 Id

Image for illustration only. It may show a product series rather than the exact product offered.

Mil-Dtl-6000D Oil & Coolant Hose 1/2 Id

https://www.roctexo.com/web/image/product.template/37596/image_1920?unique=8ef9bbe
Part numbers : RX1-6000-8 , 00850721304 , 6000-8
Unit of Measure: FT

11.60 EUR / FT 11.6 EUR 11.60 € excl. VAT

11.60 EUR / FT excl. VAT

Not Available For Sale

This combination does not exist.

Availability
13 FT ready to ship on Monday 2026-11-09
Order before 15:30 CET on Monday 2026-11-09
Up to 92 FT ready to ship on Thursday 2026-11-12
Order before 15:30 CET on Monday 2026-11-09
Up to 95 FT ready to ship on Monday 2026-11-16
Order before 15:30 CET on Monday 2026-11-09
73 FT available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

Thermoid AERODUCT® MIL-DTL-6000D oil and coolant hose for fluid-routing installations where a flexible 12.7 mm internal-diameter hose is required. Roctexo part number RX1-6000-8 corresponds to manufacturer part number 00850721304.

  • Internal diameter: 12.7 mm
  • Outside diameter: 21.4 mm
  • Minimum burst pressure: 6.9 MPa
  • Temperature range: −40 °C to +121 °C
  • Oil-resistant tube with black cover reinforced with mildew-resistant yarns
  • Designed to withstand exposure to oil, alcohol, coolant and water
  • Lightweight and flexible construction for routing in confined areas
  • Not recommended for use as a fuel line
  • Unit of measure: foot

Documentation: Thermoid AERODUCT® aviation ducting and hose catalogue (PDF).

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

PNIDODBurst PSI
6000-81/27/81000

Overview

Inside and out, aircraft hose MIL-DTL 6000D is designed to handle the effects of oil, alcohol, coolant, and water. The tube is oil resistant with a black cover reinforced with high strength mildew resistant yarns. It withstands extreme temperature conditions from -40F to +250F. Meets or exceeds U.S. military specs. Lightweight, flexible and easy-to-handle, making it the perfect hose for hard-to-get-to spots in tight engine compartments.

Sold in one foot increments.
MIL-DTL-6000C was superceded by this MIL-DTL-6000D
Note: This hose is not recommended for use as fuel lines.

Reference Chart


These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.