Skip to Content
  1. All Products
  2. All Products
  3. Goodyear Tire Rib Tube Type 420X150 Ply 4 607C41-2
Select currency EUR
Goodyear Tire Rib Tube Type 420X150 Ply 4 607C41-2

Image for illustration only. It may show a product series rather than the exact product offered.

Goodyear Tire Rib Tube Type 420X150 Ply 4 607C41-2

https://www.roctexo.com/web/image/product.template/16170/image_1920?unique=8ef9bbe
Part numbers : RX1-06-01088 , 607C41-2 , 06-01088
Unit of Measure: EA

553.59 EUR / EA 553.59 EUR 553.59 € excl. VAT

553.59 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Goodyear Aircraft Rib 607C41-2 is a 4-ply, tube-type (TT) aircraft tyre in size 6.00-6.5 / 420x150. Its rib tread configuration is intended for aviation tyre installations requiring this specified size and construction.

  • Manufacturer: Goodyear
  • Manufacturer part number: 607C41-2
  • Tyre size: 6.00-6.5 / 420x150
  • Construction: 4-ply, tube type (TT)
  • Tread design: Aircraft Rib
  • Rated load: 1,750 lb
  • Rated inflation pressure: 45 psi
  • Specified wheel size: 6.00-6.5
  • Maximum inflated dimensions: approximately 439 mm outside diameter and 150 mm section width

Verify the applicable aircraft maintenance data, approved wheel configuration and tyre requirements before installation.

Goodyear Aviation Data Book

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

Overview

Unique cord body shape, helps reduce stress as the tire cycles from tension to compression with tough casing design.

Performs in a wide range of operating conditions, specially compounded tread design and large contact area. Versatility for many runway types.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.