Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Dynon Autopilot Servo Mounting Kit For Sonex / Waiex Roll

https://www.roctexo.com/web/image/product.template/85237/image_1920?unique=8ef9bbe
Part numbers : RX1-10-07323 , 101864-000 , 10-07323
Unit of Measure: EA

115.32 EUR / EA 115.32 EUR 115.32 € excl. VAT

115.32 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 1 EA ready to ship on Monday 2026-11-16
Order before 17:00 CET on Friday 2026-11-13

The Dynon Avionics Sonex/Waiex Roll Servo Mounting Kit, part number 101864-000, provides the dedicated mounting and linkage hardware for installing a Dynon SV42EL autopilot servo in the roll axis of a dual-control Sonex or Waiex aircraft.

The kit is designed around the Sonex/Waiex roll installation and includes a servo mounting bracket, roll-servo floor plate, aluminium pushrod, rod ends, attachment hardware and rivets. The supplied pushrod is approximately 508 mm long.

  • Manufacturer: Dynon Avionics
  • Manufacturer part number: 101864-000
  • Application: Sonex/Waiex roll-servo installation
  • Servo reference: Dynon SV42EL extra-long-arm servo
  • Configuration note: intended for dual-control aircraft
  • Important: Dynon’s installation documentation states that this kit is not compatible with B-Models.

The servo is not listed as part of the mounting-kit contents. Installation should be completed in accordance with Dynon’s applicable instructions and the aircraft’s configuration.

Dynon states that this product is not approved for installation in type-certificated aircraft.

Manufacturer installation instructions: Sonex/Waiex Roll Kit

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.