Skip to Content
  1. All Products
  2. All Products
  3. Curtis Oil Drain Valve 1/2-20 NF3 CCA-2460
Select currency EUR
Curtis Oil Drain Valve 1/2-20 NF3 CCA-2460

Image for illustration only. It may show a product series rather than the exact product offered.

Curtis Oil Drain Valve 1/2-20 NF3 CCA-2460

https://www.roctexo.com/web/image/product.template/123930/image_1920?unique=8ef9bbe
Part numbers : RX1-05-03698 , CCA-2460 , 05-03698
Unit of Measure: EA

141.75 EUR / EA 141.75 EUR 141.75 € excl. VAT

141.75 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
2 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The Curtis Superior Valve CCA-2460 is a brass oil drain valve with a 1/2-20 UNF-3A thread. It uses a spiral-to-open, turn-to-lock operating action and features a drilled provision for lock wire.

Designed as a replacement oil-drain valve identified by manufacturer part number CCA-2460, this item is supplied as one each.

  • Manufacturer part number: CCA-2460
  • Thread: 1/2-20 UNF-3A
  • Valve material: brass
  • Operation: spiral to open, turn to lock
  • Lock-wire drilled
  • Special-thread installation with crush gasket
  • Non-certified; not EASA/FAA approved

Installation and continued airworthiness must be determined against the applicable engine, aircraft or component maintenance data. Curtis documentation lists a torque range of 6.8–7.9 N·m for CCA-2460 special-thread installation with a crush washer; always use the applicable maintenance instructions and specified hardware.

Relevant documentation: Curtis Superior Valve information and installation guidance.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.