Skip to Content
  1. All Products
  2. All Products
  3. Aircraft Tailfin Strobe Light 10W-1156
Select currency EUR
Aircraft Tailfin Strobe Light 10W-1156

Image for illustration only. It may show a product series rather than the exact product offered.

Aircraft Tailfin Strobe Light 10W-1156

https://www.roctexo.com/web/image/product.template/114589/image_1920?unique=8ef9bbe
Part numbers : RX1-11-16666 , BA15SWCS-10W-1156 , 11-16666
Unit of Measure: EA

59.82 EUR / EA 59.82 EUR 59.82 € excl. VAT

59.82 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
1 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The NavStrobe BA15SWCS-10W-1156 is a white LED tailfin navigation-light replacement bulb with constant-lighting and fast-strobe operating modes. It uses a BA15s single-contact base with inline pins, also identified as GE1691 / 1156.

Designed for experimental aircraft use only. This product is not EASA/FAA approved.

  • Manufacturer part number: BA15SWCS-10W-1156
  • 15 Cree LED emitters
  • 10 W equivalent output
  • Aviation White, 2700 K
  • Rated voltage: 10–28 VDC
  • Current draw: less than 288 mA at 14.2 VDC
  • Luminous flux: 680 lm at 0° and 410 lm at 90°
  • Operating modes: constant lighting and fast strobe
  • Approximate dimensions: 48 × 18 mm
  • Approximate weight: 8 g
  • Supplied as one light bulb per pack

Mode selection is controlled by the power cycle: the first switch-on activates constant lighting; a second switch-on within 3 seconds activates fast strobe.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.