Skip to Content
  1. All Products
  2. All Products
  3. Aeroduct SCEET-3 Ducting 3/4 11Foot Piece
Select currency EUR
Aeroduct SCEET-3 Ducting 3/4 11Foot Piece

Image for illustration only. It may show a product series rather than the exact product offered.

Aeroduct SCEET-3 Ducting 3/4 11Foot Piece

https://www.roctexo.com/web/image/product.template/60173/image_1920?unique=8ef9bbe
Part numbers : RX1-05-11874 , 00890100304 , 05-11874
Unit of Measure: EA

139.80 EUR / EA 139.8 EUR 139.80 € excl. VAT

139.80 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

Thermoid Aeroduct® SCEET-3 is a flexible, double-ply silicone-coated ducting supplied as one 3.35 m piece. Manufacturer part number 00890100304.

With a nominal internal diameter of 19 mm (3/4 in.), SCEET ducting is intended for conducting very hot or cold air and for conveying fumes. Its flexible construction supports installation around obstructions and tight bends, while the lined design is intended to reduce air-friction loss compared with similar unlined ducting.

  • Product series: Aeroduct® SCEET-3
  • Manufacturer part number: 00890100304
  • Nominal inside diameter: 19 mm (3/4 in.)
  • Length: 3.35 m (11 ft)
  • Construction: double-ply silicone-coated ducting
  • Operating temperature range: -62 °C to +288 °C (-80 °F to +550 °F)
  • Suitable for hot/cold air handling and fume conveyance

Not recommended for liquids, highly abrasive materials, or negative-pressure applications. Verify dimensions, operating conditions and approved data for the intended installation before use.

Technical documentation: Thermoid Aeroduct® Aviation Ducting & Hose Catalogue.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.