Dehydrator Plug 18 MM AN4062-1
Part Number(s): AN4062-1, MS27215-2
Unit of Measure Name:
Units
Internal Reference:
RX1-AN4062-1
Overview
These plugs are used to prevent rust and corrosion in engines while in storage. Contain silica gel which turns from blue to pink when moisture is absorbed. Reusable and refillable. The pink silica gel may be reactivated (after removing from reservoir) by heating for 16 hours at 250°F. |
Drying Directions
- Oven:
- Line a deep oven pan with foil, spread the silica evenly throughout the pan, heat oven to 300¢X and leave in the oven for about 3 hours. All the silica will turn blue or purple in color.
- Microwave:
- Place the silica in a thick glass backing dish, approx 1/4", and spread
- evenly. Set the Microwave to medium and microwave it for 3 to 5 minutes,
- and then stir around with a spoon. Repeat this step until the silica is
- blue/purple. It takes approx 8-12 minutes to dry one pound of silica.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
These products might also be of interest
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.