Skip to Content

Dynon Pitot Install Kit

https://www.roctexo.com/web/image/product.template/3756/image_1920?unique=4dc4bc3
Part numbers : RX1-12-03283 , 102628-000 , 12-03283
Unit of Measure: EA

183.25 EUR / EA 183.25 EUR 183.25 € excl. VAT

183.25 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 5 EA ready to ship on Monday 2026-07-20
Order before 17:00 CET Today
Up to 9 EA ready to ship on Thursday 2026-07-23
Order before 17:00 CET Today
8 EA available on request, fees apply
Special order from vendor stock.

The Dynon Pitot/Static/AOA Pneumatic Installation Kit provides the pneumatic plumbing components for a Dynon pitot, static and angle-of-attack installation. Manufacturer part number: 102628-000.

The kit includes colour-coded polyethylene tubing for clear line identification: blue for AOA, green for pitot and white for static. A total of approximately 25.9 m of tubing is supplied, together with static ports, pneumatic fittings, Y- and T-unions, snap bushings, flared coupling components and a tubing cutter.

Dynon quick-disconnect fittings use stainless-steel retainers to support straightforward connection, disconnection and reconnection of tubing during installation or instrument maintenance.

  • 2 static air ports
  • Blue, green and white polyethylene pneumatic tubing
  • Straight and elbow pneumatic fittings
  • Y-unions and T-union
  • 30 snap bushings for tubing pass-through protection
  • Tubing cutter and flared coupling components

Important: The Dynon AOA/Pitot probe is not included. This product is not EASA/FAA approved for installation in type-certificated aircraft. Installation suitability and any required approvals remain the responsibility of the installer and aircraft owner/operator.

Refer to the Dynon AOA, Pitot, Static Plumbing Kit Installation Guide and applicable Dynon system installation documentation before installation.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.