Bogert Talon Oil Filter Tool
Part Number(s): 10M-TALON, 11-11556
Unit of Measure Name:
Units
Internal Reference:
RX1-11-11556
Overview
The 10M-TALON oil filter tool has undergone some changes through the years, improving as the demands of general aviation become greater. The TALON is one of the strongest and most compact yet. Just pop the TALON on a 3/8 drive extension and ratchet and it gets the job done. The TALON Oil Filter Tool was created to remove stubbornly stuck oil filters. The tool is meant to be safe in tight quarters and unable to slip, attempting to minimize damage to nearby components. This is still a messy process but this tool is your best chance of removing stuck filters without damaging anything else. Size:Adjustable down to 1.10" in three prong mode for smaller oil filters Adjustable down to .95" in two prong mode for smaller oil filters Adjustable up to 3.14" for larger oil filters |
Features
- Three pin (TALON) engagement in oil filter plate for stability and strength
- Good for up to 1500 in. lbs. of torque
- Works in tight spaces!
- Works on Aircraft, Automotive, Marine and Recreational Vehicle applications
- Made in the USA
Instructions
- Open the filter can and remove the filter element. If necessary, cut or tear open the filter can where ever it is accessible, gaining access to the filter element.
- Use the new filter as a guide. Set the pin positions on the 10M-TALON Oil Filter Tool to fit into the oil holes in the oil filter plate.
- Insert the Oil Filter Tool into the stuck filter can using a 3/8" ratchet extension and ratchet wrench. Engage the oil holes in the filter plate with the pins of the oil filter tool.
- Turn counter clockwise to loosen the filter.
Benefits
- This is a lot less frustrating than trying to remove a stuck filter by any other method
- Saves time so you can do other things
- Saves money
These products might also be of interest