RC Allen RCA2610-3 Digital Attitude With Slip Ind
Part Number(s): 10-06994, 102-0403-07-01
Documents
Unit of Measure Name:
Units
Internal Reference:
RX1-10-06994
Overview
| The RCA2610 Series Electric Digital Attitude Indicator is the culmination of more than 10 years of innovation from RC Allen. The RCA2610 comes in two sizes; the RCA2610-3 is the 3-inch version and the RCA1610-2 is the 2-inch version; each fit existing panel cutouts. Both sizes have a standard horizon display that includes an on-screen Digital Slip Indicator and Rate-of-Turn Indicator. As with all RC Allen digital instruments, the RCA2610 has an optional Internal Battery Backup for up to 3 hours of emergency power. The standard Pitch Sync feature allows pilots to instantly synchronize the airplane symbol to the horizon line when flying in a pitch up or pitch down attitude. It is the perfect companion to the RCA1510 Digital Heading Indicator. RCA2610-P
The panel tilt angle can be set from 0 to 90 degrees in one-degree increments. Standard models are shipped with 0 degrees tilt but tilt angle must be specified at time of order. Made in the USA |
Features
- Pitch Sync Feature
- Internal Battery Backup
- Sharp Anti-Aliased Screen
- Black Anodized Bezel
- Fast Response in Roll & Pitch
- Vibration Resistant
- Easy to install
- Multi-Volt plug & fly
- Light Weight
- 2 Year Warranty
- FAA/EASA Certified
Specifications
- Operating Voltage: 9 to 32VDDC
- Current Draw: (14VDC system) 0.20 AMPs MAX, (28VDC system) 0.18 AMPs MAXa
- Circuit Breaker Size: 1AMP
- Settling Error: 1 Degree Maximum in Roll and Pitch
- Operating Temperature Range: -20º to +55º C
- Dimensions: Please see specifications document.
- FAA Specification Conformance: TSO-C4c, TSO-C113a, DO-160G & DO-178B Level C
- EASA Specification Conformance: ETSO-C4c and ETSO-C113a
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
These products might also be of interest
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.