Rapco Brake Rivet Tool RA825
Part Number(s): 10-02065, RA825
Unit of Measure Name:
Units
Internal Reference:
RX1-10-02065
Overview
| A high-quality tool designed for use in the installation and removal of tubular brass or steel brake lining rivets, 5/32 of an inch in diameter. Recognized by professionals, this screw type set allows controlled pressure for a proper flare. This reduces the chance of cracking not only the rivet but also of the lining material. It also helps avoid the costly warping of brake assembly back plates and pressure plates, often associated with using the hammer type method. The RAPCO rivet tool is designed to be mounted in a vise or can be handheld. Packaged in a reusable case the RA825 is a quality tool for a professional job. Maximum set travel 1 inch. Maximum working area 1 1/4 inch. |
In The Box
- Rivet Punch
- Set
- Anvil
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
These products might also be of interest
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.