Superfil Sandable Non-Shrinking Epoxy Filler Quart Kit
Part Number(s): 09-28250, 8-EF3
Unit of Measure Name:
qt (US)
Internal Reference:
RX1-09-28250
| Description | Part Number |
|---|---|
| Poly-Fiber SuperFil 1 Qt Kit (20oz. Resin / 12oz. Hardener) | 09-28250 |
Overview
| An ultra lightweight corrosion-inhibiting filler for aircraft, marine, and automotive use. Adheres to composites, bare aluminum, steel, and bare or varnished wood. Epoxy resin with non-MDA hardener. Ships non-hazardous. Apply EP-420 Epoxy Primer directly over SuperFil. Superfil is an ultra-lightweight epoxy filler for rough fill and contouring. Comes in two containers. Mix, apply with a squeegee, and let dry overnight. More consistent than hand-mixed micros. Weighs only 3.8 lbs. per gallon. 1 Quart Kit (12 oz. Hardener + 20 oz. Resin) 3 Gallon Kit (1 gal. Hardener + 2 gal. Resin)HAZARDOUS |
Features
- Composite Filling:
- Use as you would an epoxy micro slurry. Mix by the weight for the best results. Scuff-sand smooth surfaces before application. Trowel or squeegee to desired thickness. After drying, sand to shape and finish. Works as an excellent filled material.
- Bare Aluminum:
- Scruff surface with a Scotch-Brite pad. Treat bare aluminum with E-2300 Conversion Coating prior to application. Apply EP-420 Primer directly over dried SuperFill.
- Bare Steel:
- Clean off all rust and oil, and wipe with C-2200 Meti-Sol.
- Varnished or Bare Wood:
- Scuff-sand and clean as necessary. EV-400 Epoxy Varnish may be applied directly over SuperFill.
Specifications
- By Weight (preferred): 2 parts A to 1 part B
- By Volume: 2 parts A to 1 part B.
- Thoroughly stir each individual container of part A and part B before combining. Resin or hardener can separate from fillers during storage. After combining parts A and B scape the sides of the Revision on 21 mixing container to insure a through blend. Mix o a consistent high color blue color.
- Cure: Allow to cure at 70° or above for best results. Lower temperatures will lengthen the cure time
- Dry Film Cure: 8 hours at 77°
- Cure to Sand: 12 hours at 77°
- Pot Life: One hour at 77°
- Clean Up: MEK before curing occurs
- Shelf Life: Twi years unopened. Avoid storage above 100°. Resin will separate from filler during storage. Remix thoroughly.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
These products might also be of interest
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.