
Image for illustration only. It may show a product series rather than the exact product offered.
Chemetall Aerospace
RX11-ARDROX AV25
ARDROX AV25 CORROSION INHIBITING COMPOUND, AEROSOL 400 ML //MIL-PRF-16173E Cls 1, Gº 3 (Z11502) CM527
36.20 EUR/EA
Excluding VAT
Availability
Up to 66 EA ready to ship on Monday 2026-12-14Order before 16:00 CET on Wednesday 2026-12-02
Part numbers
- Roctexo
- RX11-ARDROX AV25
- Manufacturer
- ARDROX AV25
Product details
Ardrox AV 25
Corrosion Inhibiting Compound
Penetrating, water displacing, general purpose, corrosion inhibiting compound (CIC). Forms a soft, waxy film.
Use:
- Applied as a coating to protect metals commonly used in airframe structures and in aerospace components from corrosion.
- AV 25 can be used in all areas of the airframe on painted and unpainted surfaces.
It is designed for the treatment of areas where a soft, lubricating film is required, for example pulleys, control cables and other movable components.
Application:
- AV 25 can be applied by dipping, brushing or spraying. For maximum penetration capability and the most effective corrosion inhibiting performance, spray application is recommended, however, brush application is effective when applying AV 25 to specific areas or components.
- AV 25 can be sprayed using either the specifically designed ACS - System (airmix application equipment), or the AAS - System (airless application equipment).
- Operating instructions and recommendations for using spray equipment are given in the Technical Manual "Aircraft Corrosion Protection and Control" available from the local Chemetall Sales Office.
Corrosion Inhibiting Compound
Penetrating, water displacing, general purpose, corrosion inhibiting compound (CIC). Forms a soft, waxy film.
Use:
- Applied as a coating to protect metals commonly used in airframe structures and in aerospace components from corrosion.
- AV 25 can be used in all areas of the airframe on painted and unpainted surfaces.
It is designed for the treatment of areas where a soft, lubricating film is required, for example pulleys, control cables and other movable components.
Application:
- AV 25 can be applied by dipping, brushing or spraying. For maximum penetration capability and the most effective corrosion inhibiting performance, spray application is recommended, however, brush application is effective when applying AV 25 to specific areas or components.
- AV 25 can be sprayed using either the specifically designed ACS - System (airmix application equipment), or the AAS - System (airless application equipment).
- Operating instructions and recommendations for using spray equipment are given in the Technical Manual "Aircraft Corrosion Protection and Control" available from the local Chemetall Sales Office.