
Image for illustration only. It may show a product series rather than the exact product offered.
Chemetall Aerospace
RX11-ARDROX 185L
ARDROX 185L , LIQUID ALKALINE RUST & SCALE REMOVER , PAIL 20 LT
224.48 EUR/EA
Excluding VAT
Availability
Up to 219 EA ready to ship on Monday 2026-12-14Order before 16:00 CET on Wednesday 2026-12-02
Part numbers
- Roctexo
- RX11-ARDROX 185L
- Manufacturer
- ARDROX 185L
Product details
Alkaline rust and scale remover .
Ardrox® 185L is a highly alkaline concentrated solution in water containing sequestrants. It is also available as a powder under the name Ardrox® 185. Ardrox® 185L is primary intended for the removal of heavy rust and scale from ferrous components in immersion tanks but it is also capable to remove oil, grease and some air-dried paints. It will not attack or cause hydrogen embrittlement in ferrous alloys and there is markedly less tendency for re-rusting to occur than with acid pickling. When used in conjunction with the adequate other Ardrox® specialties, Ardrox® 185L can be used to remove scale from hot-end jet engine components. It can also be used for cleaning parts made of Titanium.
Applications :
Application Ardrox® 185L is usually used at a concentration of 30-50% by volume in water, depending on the amount of rust or scale to be removed. This corresponds to a concentration of 200 - 375 g/L of Ardrox® 185 in water. Ardrox® 185 must always be dissolved in cold water. There will be an exothermic reaction and the solution will heat up to 50-60°C / 120-140°F.
Specifications :
- SAE ARP 1755B (conformance)
- CFMI CFM56
- Rolls Royce CSS244 & OMat
- SNECMA DMR 70-620
- GE SPMC 70-80-04
- Pratt & Whitney SPMC 70-12-00
- Turbomeca
Ardrox® 185L is a highly alkaline concentrated solution in water containing sequestrants. It is also available as a powder under the name Ardrox® 185. Ardrox® 185L is primary intended for the removal of heavy rust and scale from ferrous components in immersion tanks but it is also capable to remove oil, grease and some air-dried paints. It will not attack or cause hydrogen embrittlement in ferrous alloys and there is markedly less tendency for re-rusting to occur than with acid pickling. When used in conjunction with the adequate other Ardrox® specialties, Ardrox® 185L can be used to remove scale from hot-end jet engine components. It can also be used for cleaning parts made of Titanium.
Applications :
Application Ardrox® 185L is usually used at a concentration of 30-50% by volume in water, depending on the amount of rust or scale to be removed. This corresponds to a concentration of 200 - 375 g/L of Ardrox® 185 in water. Ardrox® 185 must always be dissolved in cold water. There will be an exothermic reaction and the solution will heat up to 50-60°C / 120-140°F.
Specifications :
- SAE ARP 1755B (conformance)
- CFMI CFM56
- Rolls Royce CSS244 & OMat
- SNECMA DMR 70-620
- GE SPMC 70-80-04
- Pratt & Whitney SPMC 70-12-00
- Turbomeca