ROCTEXOAEROSPACE
RX11-AEROSHELL FLUID 3

Image for illustration only. It may show a product series rather than the exact product offered.

Aeroshell

RX11-AEROSHELL FLUID 3

AEROSHELL FLUID 3, GENERAL PURPOSE MINERAL LUBRICATING OIL, CAN 1 GAL //MIL-PRF-7870D/O-142/DEF STAN91-47

61.71 EUR/EA

Excluding VAT

Availability

Up to 88 EA ready to ship on Monday 2026-12-14Order before 16:00 CET on Wednesday 2026-12-02

Part numbers

Roctexo
RX11-AEROSHELL FLUID 3
Manufacturer
AEROSHELL FLUID 3

Product details

AEROSHELL FLUID 3

AeroShell Fluid 3 is a general purpose mineral lubricating oil recommended for general lubrication of aircraft parts that require a light oil with good low temperature characteristics and a low freezing point. It is inhibited against oxidation and corrosion. AeroShell Fluid 3 is a relatively low viscosity product with good resistance to evaporation.

Applications :
- AeroShell Fluid 3 is recommended for general lubrication of aircraft parts that require a light oil, e.g. hinges, pivot joints, shaft joints, linkage pins and bearings, pulleys, cables, camera mechanisms, radio and radar gear and instruments. AeroShell Fluid 3 is normally applied by means of an oil can or brush. For this reason it is also described as 'an oilcan lubricant'.
- Operating temperature range of AeroShell Fluid 3 is -54°C to +121°C.
- For high temperature applications where no provision is made for frequent re-lubrication the synthetic oil, AeroShell Fluid 12, should be used in place of the mineral oil, AeroShell Fluid 3; however in this case care should be taken to ensure that there is no incompatibility between AeroShell Fluid 12 and seals, paints etc.

Specification :
- Approved MIL-PRF-7870D
- Approved DEF STAN 91-47
- O-142
- OM-12

Related products

Recommendations are not installation or interchangeability approval.