RX1-11-21019

The Trig TT23 Class 1 Mode S remote transponder unit with mounting tray is supplied under manufacturer part number 02295-00-01. Trig identifies this part number as the TT23 Mode S Transponder Shipping Level.

The TT23 is a compact, two-part transponder design using a separate remote transponder box and TC20 control unit. This remote assembly is intended for use in a TT23 installation where panel space and equipment placement are important considerations.

• Class 1 Mode S Level 2els transponder with ADS-B Out capability when installed with an appropriate compatible GPS position source.
• ETSO-C112e Class 1 Level 2els and ETSO-C166b A3 Class B1S compliance.
• 250 W nominal transmitter output at the connector.
• 11–33 V DC supply requirement; typical power consumption is 6 W at 14 V.
• Remote transponder dimensions in mounting tray: 37 × 64 × 149 mm.
• Remote transponder weight: 300 g.
• Supplied remote transponder assembly includes the TT23 transponder unit, P/N 02294-00-01, and TT23/TT23G mounting tray, P/N 02325-00.

Installation requires suitable aircraft wiring, antenna installation and applicable approval data. ADS-B Out functionality depends on the installed position source, system configuration and approval basis. Confirm the required system configuration, including the separate controller and installation items, before purchase.

Manufacturer documentation:

• TT23/TT23G product brochure
• TT23/TT23G installation manual
• TT23/TT23G operating manual