RX1-01-01598

TR-102 Regular Mold Release is a firm, carnauba-based paste wax blended with synthetic waxes for thermoset composite moulding applications. Supplied in a 14 oz (approximately 400 g) can.

Designed for fast, even coverage, TR-102 is intended as a release agent on FRP tooling, metal and other hard-surface moulds. Its high carnauba wax content is formulated to polish to a high-gloss finish without streaking.

• Manufacturer part number: TR-102
• High carnauba wax content
• Good heat and chemical resistance properties
• Easy application and wipe-off characteristics
• Helps reduce wax build-up and styrene accumulation
• Suitable for open-mould hand or spray lay-up, RTM/RIM, vacuum-bag and compression moulding processes using polyester or epoxy resins

Apply sparingly to a clean mould surface, allow the wax to haze, then polish to the required finish. Drying time varies with working temperature; refer to the manufacturer technical data sheet (PDF) for detailed handling guidance and product properties.