RX1-09-28260

SuperFil® 8-EF4 is a three-gallon industrial kit of sandable, non-shrinking epoxy filler intended for rough filling and contouring applications. The lightweight filler is supplied as a two-component system and is designed to provide a consistent alternative to hand-mixed micro fillers.

The product is described as adhering to composite materials, bare aluminium, steel, and bare or varnished wood when surfaces are properly prepared. Once cured, it can be sanded to shape and finish.

• Manufacturer part number: 8-EF4
• Kit size: 3 gallons
• Contents: 2 gallons resin (Part A) and 1 gallon hardener (Part B)
• Mix ratio: 2 parts Part A to 1 part Part B, by weight or volume
• Sandable epoxy filler for filling and contouring work
• Published pot life: approximately 1 hour at 77°F (25°C)
• Published cure-to-sand time: approximately 12 hours at 77°F (25°C)

Thoroughly stir each component before mixing, apply to a suitably prepared surface with a trowel or squeegee, and allow the material to cure before sanding. Refer to the applicable Part A and Part B safety data documentation before use.