RX1-12307-23

Shielded Ignition Harness 12307-23 is an ignition lead assembly listed for Lycoming O-435 engines equipped with Bendix SF6 magnetos. It is designed for installations using a screw-on magneto back plate and 5/8 in spark plugs.

The harness uses 5 mm ignition wire with 16 tightly braided copper strands and a white, scuff-resistant silicone impregnation. The flexible lead construction supports routing around tight bends, while the grounding circuit is specified without soldered joints.

• Part number: 12307-23
• Listed engine/magneto configuration: Lycoming O-435 / Bendix SF6
• For screw-on magneto back plates only
• For 5/8 in spark plugs only
• Magneto back plate not included
• Unit of measure: each
• Not EASA/FAA approved; intended for experimental aircraft applications. Any use on a certificated aircraft must be assessed and approved in accordance with applicable airworthiness requirements.

Please verify the engine, magneto type, outlet-plate arrangement and spark-plug size against the aircraft maintenance data before installation.