RX1-11-02611

The Radiorax RK2025 is a dual-stack avionics tray-mount kit designed for panel-mounted avionics installations. It uses the Radiorax slotted-rail mounting concept, allowing tray positions to be set and adjusted during installation.

This RK2025 configuration is identified as an approximately 457 mm dual-stack kit with reduced outer rails and a reduced-dimension centre rail. The rail system is intended to support an organised avionics stack and facilitate future tray repositioning or reconfiguration where permitted by the applicable installation data.

• Manufacturer part number: RK2025
• Roctexo part number: RX1-11-02611
• Dual-stack tray-mount configuration
• Approximate rail length: 457 mm
• Reduced outer rails and reduced-dimension centre rail
• Referenced installation documentation includes an installation manual, parts manual and instructions for continued airworthiness.

Manufacturer catalogue material identifies the RK2025 as FAA-PMA and STC’d. For European installations, confirm the applicable certification basis, approved installation data and aircraft-specific eligibility with an appropriately authorised maintenance or design organisation before installation.