ROCTEXOAEROSPACE
A commercial account is required before proceeding to checkout. Select a commercial account or create a commercial account.
You are using our new webshop. The old webshop is still available.
RX1-09-04569

Image for illustration only. It may show a product series rather than the exact product offered.

RX1-09-04569

Poly Filler Ht Black Quart Kit

60.89 EUR/EA

Excluding VAT

Availability

2 EA available on request, fees applyHazardous material special order from vendor stock.

Part numbers

Roctexo
RX1-09-04569
Manufacturer
POLY FILLER HT BLACK
Vendor
09-04569

Product details

PTM&W POLY FILLER HT Black is a two-component polyester filler paste formulated for high-temperature filling and repair applications. The black, smooth thixotropic paste is designed for easy spreading, low cured shrinkage and a dry, tack-free cured surface to support sanding and finishing operations.

Manufacturer part number: POLY FILLER HT BLACK

  • Black high-temperature polyester filler paste
  • Quart kit configuration
  • Mix ratio by weight: 100 parts resin to 2 parts cream hardener
  • Published pot life: 6–8 minutes for a 4 fl oz mixed mass at 25 °C
  • Published sanding time: 20–25 minutes after gel
  • Published cured hardness: 89 Shore D
  • Suitable for applications such as composite porosity filling, honeycomb panel-edge filling, bonding inserts and bushings, and repair of cracks, crevices and holes, subject to suitability assessment for the specific task

The manufacturer states that the cured material may be used at service temperatures above 400 °F. Refer to the applicable PTM&W technical data sheet and safety data sheet before use. This product is classified as hazardous for transport.