ROCTEXOAEROSPACE
A commercial account is required before proceeding to checkout. Select a commercial account or create a commercial account.
You are using our new webshop. The old webshop is still available.
RX1-08-17114

Image for illustration only. It may show a product series rather than the exact product offered.

Phillips 66 Aviation

RX1-08-17114

Phillips 66 Oil Victory Aviation 20W-50 - Case Of 12 Quarts

103.50 EUR/EA

Excluding VAT

Availability

2 EA ready to ship TodayOrder before 15:30 CET Today
AOG

AOG service might be available even outside our opening hours. AOG services incur a fee starting from 100 EUR.

Accept and see AOG contact details

+46106500380 aog@roctexo.com

Up to 12 EA ready to ship on Thursday 2026-11-12Order before 15:30 CET Today
Up to 21 EA ready to ship on Monday 2026-11-16Order before 15:30 CET Today
23 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.

Part numbers

Roctexo
RX1-08-17114
Manufacturer
01083556
Vendor
08-17114

Product details

Overview

Phillips 66® Victory AW 20W-50 Oil is an ashless dispersant, multi-grade engine oil specially formulated for year-round use in aircraft piston engines. Victory AW 20W-50 is pre-blended with the proper concentration of antiscuff/antiwear additive (LW-16702) mandated by Lycoming Service Bulletins 446E and 471B and Service Instruction 1409C. It provides distinct performance benefits compared with single-grade engine oils, including easier starting and faster oil circulation at low temperatures, reduced warm-up time, and reduced oil consumption in most engines. It maintains its film strength under high loads and at high temperatures to protect against wear and piston scuffing.

The ashless dispersant formulation helps minimize the formation of engine sludge, varnish, piston deposits and combustion chamber deposits, resulting in a much cleaner engine compared with the use of straight (non-dispersant) mineral oils.

Victory AW 20W-50 Aviation Oil is recommended for use in opposed piston engines. It can replace Commercial Grade 65, 80 or 100 single-grade engine oils with no sacrifice in performance.

Features

  • Ashless dispersant helps minimize engine sludge and varnish deposits for a cleaner engine
  • Pre-blended with Lycoming-approved antiwear additive
  • High film strength for protection against wear and piston scuffing
  • High viscosity index and low pour point for use over a wide temperature range
  • Protects against rust and corrosion
  • Formulated with the same high-quality base oils as used in Phillips 66 X/C® Aviation Oil

Specifications

  • SAE Grade: 20W-50
  • Gravity, °API: 30.1
  • Specific Gravity @ 60°F: 0.876
  • Density, lbs/gal @ 60°F: 7.29
  • Color, ASTM D1500: 2.5
  • Flash Point (COC), °C (°F): 235 (455)
  • Pour Point, °C (°F): -33 (-27)
  • Viscosity, Kinematic
  • cSt @ 40°C: 159
  • cSt @ 100°C: 19.8
  • Viscosity Index: 144
  • Cold Cranking Viscosity, cP: 5,200
  • @ (°C): (-15)
  • Acid Number, ASTM D664, mg KOH/g: 0.15
  • Ash Content, SAE J1787, wt %: Nil
  • Copper Corrosion, ASTM D130: Pass
  • Foam Test, ASTM D892: Pass

Approvals

  • Avco Lycoming Material Specification No. 301G
  • Pratt & Whitney Service Bulletin No. 1183 Rev. U
  • SAE Standard J1899
  • Teledyne Continental Material Specification MHS-24B
  • U.S. Military Specification MIL-L-22851D (obsolete) for additive treatment QPL
  • QPL approval number: D07L2-50