Image for illustration only. It may show a product series rather than the exact product offered.
Phillips 66 Aviation
RX1-08-13850
Phillips 66 Oil Victory Aviation 100AW SAE 50 - Case Of 12 Quarts
98.72 EUR/EA
Excluding VAT
Availability
1 EA ready to ship TodayOrder before 15:30 CET Today
AOG
AOG service might be available even outside our opening hours. AOG services incur a fee starting from 100 EUR.
Accept and see AOG contact details
Up to 2 EA ready to ship on Thursday 2026-11-12Order before 15:30 CET Today
Up to 3 EA ready to ship on Monday 2026-11-16Order before 15:30 CET Today
2 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-08-13850
- Manufacturer
- 1059152
- Vendor
- 08-13850
Product details
Overview
| Phillips 66® Victory Aviation Oil 100AW is an ashless dispersant, single-grade engine oil pre-blended with the proper concentration of antiscuff/antiwear additive (LW-16702) as mandated by Lycoming Service Bulletins 446E and 471B and Service Instruction 1409C. It is recommended for use in opposed piston and radial piston aircraft engines where cam lifter wear is a concern. The ashless dispersant formulation helps minimize the formation of engine sludge, varnish, piston deposits and combustion chamber deposits, resulting in a much cleaner engine compared with the use of straight (nondispersant) mineral oils. This oil has a high viscosity index and low pour point compared with many other single-grade aircraft engine oils, allowing its use over a wide temperature range. Victory Aviation Oil 100AW is FAA approved as an alternate method of compliance to AD80-04-03 R2, paragraph b.1. |
Features
- Ashless dispersant helps minimize engine sludge and varnish deposits for a cleaner engine
- Pre-blended with Lycoming-approved antiwear additive
- High film strength for protection against wear and piston scuffing
- High viscosity index and low pour point for use over a wide temperature range
- Protects against rust and corrosion
- Formulated with the same high-quality base oils as used in Phillips 66 X/C® Aviation Oil
Specifications
- Avco Lycoming Material Specification No. 301G
- Pratt & Whitney Service Bulletin No. 1183 Rev. U
- SAE Standard J1899
- Teledyne Continental Material Specification MHS-24B
- U.S. Military Specification MIL-L-22851D (obsolete) for additive treatment
Applications
- Opposed piston aircraft engines, especially where cam lifter wear is a concern