RX1-11-20261

The Thiesen Electronics EPTA-NG is an LED lighting system combining position, tail and anti-collision light functions. Designed with an integrated FLARM interface and intelligent synchronisation, it is intended to coordinate light pulses and, when connected to a compatible PowerFLARM unit, adjust the flash sequence in response to FLARM alert levels.

The compact light unit integrates its electronics internally, avoiding the need for separate external controllers or power-conditioning units. Its high-optical plastic housing is described by the manufacturer as resistant to vibration, water and dust. Adequate cooling airflow must be maintained during installation.

• Manufacturer part number: EPTA-NG
• Operating voltage: 10–17 V DC; typical onboard supply 12.8–13.4 V DC
• Power consumption: approximately 20 W
• Protection: 5 A fuse or circuit breaker
• Dimensions: 80 × 40 × 30 mm (L × W × H)
• Weight: approximately 76 g, including connecting cables
• Mounting hole diameter: 4.5 mm
• Integrated FLARM interface and intelligent synchronisation

This is a NON-TSO product. It is not stated as EASA/FAA approved; verify the applicable certification, installation and airworthiness requirements for the intended aircraft before use.

Manufacturer documentation: EPTA-NG mounting instructions (PDF).