RX1-05-11255

The McFarlane MCTL1014D048-T is a dual turn-to-lock choke control with a T-handle knob and a 4 ft (approximately 1.2 m) conduit length designation. It is designed for dual-carburettor Rotax 912/914-series choke-control installations, providing a clean panel-mounted control arrangement without a splitter box.

A quarter-turn of the knob locks or unlocks the control at the selected position. The all-metal control incorporates a high-temperature Teflon-lined conduit for smooth, consistent operation.

• Manufacturer part number: MCTL1014D048-T
• Dual control configuration with T-handle knob
• 4 ft / approximately 1.2 m conduit length designation
• Adjustable cable stops to limit travel
• Includes two adjustable barrel stops for attachment to carburettor choke arms and an Allen wrench
• Pull-load application only; not designed for push loads
• Control length is measured from the panel fitting to the end of the conduit; inner wires extend beyond the conduit and may be trimmed during installation

This control is not EASA/FAA approved for certified aircraft and is not intended for flight controls or flight-control trim tabs. Refer to the applicable McFarlane control documentation and the aircraft or engine installation data before installation.