RX1-05-11238

McFarlane Aviation MCC101D096-RR is a dual, non-locking choke control with an approximately 2.4 m conduit and a round red anodised-aluminium knob. It is designed by the manufacturer for dual-carburettor Rotax 912/914-series engine choke installations, providing a tidy alternative to a separate splitter box.

The all-metal control uses a high-temperature Teflon-lined conduit for smooth operation. An internal elastomer seal provides vibration damping and light operating resistance; where the choke installation incorporates a return spring, the control returns to the closed position when released.

• Manufacturer part number: MCC101D096-RR
• Dual, non-locking configuration
• Approx. 2.4 m conduit length, measured from the panel fitting to the end of the conduit
• Round red anodised-aluminium knob
• Minimum travel: 89 mm
• Conduit outside diameter: approx. 4.8 mm
• 1.6 mm, 7 x 7 stainless-steel inner wire
• Approximate maximum pull load: 110 N; not designed for push loads
• Operating temperature: approximately -54 °C to +232 °C
• 7/16-20 UNF panel mounting thread
• Includes two adjustable barrel stops for attachment to the carburettor choke arms

The conduit may be trimmed to suit the installation; the inner wires extend at least 76 mm beyond the conduit. This control is not EASA/FAA approved and must not be used for flight controls or flight-control trim tabs.