RX1-09-06244

Hardman DOUBLE/BUBBLE 4008 Non-Sag Epoxy is a two-part, fast-setting epoxy adhesive supplied in a 3.5 g packet. Its thixotropic, non-sag paste consistency is suited to bonding, sealing, gap filling, fixturing and tacking where application on vertical or overhead surfaces is required.

The mixed adhesive is opaque white and cures at room temperature. It is supplied as a convenient dual-component packet with a 1:1 mix ratio.

• Manufacturer part number: 4008
• Two-part, non-sag epoxy adhesive
• Packet size: 3.5 g
• Colour: opaque white when mixed
• Working time: approximately 3 minutes at 25 °C
• Typical cure time: 15 to 60 minutes at 25 °C
• Maximum stated service temperature: up to 82 °C
• Reported suitable substrates include aluminium, epoxy, glass, wood and stone

Please review the applicable technical data sheet and safety data sheets for both components before use. Select and use this adhesive only where permitted by the applicable maintenance data and procedures.