Image for illustration only. It may show a product series rather than the exact product offered.

RX1-02-30015

ES6279 Epoxy Quart Part A

86.30 EUR/QT

Excluding VAT

Availability

Up to 1 QT ready to ship on Thursday 2026-11-12Order before 16:00 CET Tomorrow

6 QT available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.

Part numbers

Roctexo: RX1-02-30015
Manufacturer: ES6279
Vendor: 02-30015

Product details

PTM&W AEROPOXY ES6279 Part A is the resin component of the ES6279 two-part, non-metal-filled epoxy adhesive system. This quart unit is intended for use with the corresponding ES6279 Part B component.

When combined as a complete A/B system, ES6279 is a smooth paste adhesive formulated for bonding similar or dissimilar materials. The manufacturer specifies a 1:1 mix ratio by weight or volume. Typical mixed-system gel time is 20–30 minutes at approximately 25 °C, with a room-temperature cure time of 6–8 hours.

Manufacturer part number: ES6279
Component: Part A
Unit of measure: Quart
Two-part epoxy adhesive system; Part B is required for use
Specified A/B mix ratio: 1:1 by weight or volume

Refer to the manufacturer’s ES6279 product bulletin for preparation, mixing, curing and safety guidance before use.