Image for illustration only. It may show a product series rather than the exact product offered.
Dynon Avionics
RX1-12-03283
Dynon Pitot Install Kit
187.12 EUR/EA
Excluding VAT
Availability
Part numbers
- Roctexo
- RX1-12-03283
- Manufacturer
- 102628-000
- Vendor
- ASS-12-03283
- Vendor
- 12-03283
Product details
The Dynon Pitot/Static/AOA Pneumatic Installation Kit provides the pneumatic plumbing components for a Dynon pitot, static and angle-of-attack installation. Manufacturer part number: 102628-000.
The kit includes colour-coded polyethylene tubing for clear line identification: blue for AOA, green for pitot and white for static. A total of approximately 25.9 m of tubing is supplied, together with static ports, pneumatic fittings, Y- and T-unions, snap bushings, flared coupling components and a tubing cutter.
Dynon quick-disconnect fittings use stainless-steel retainers to support straightforward connection, disconnection and reconnection of tubing during installation or instrument maintenance.
- 2 static air ports
- Blue, green and white polyethylene pneumatic tubing
- Straight and elbow pneumatic fittings
- Y-unions and T-union
- 30 snap bushings for tubing pass-through protection
- Tubing cutter and flared coupling components
Important: The Dynon AOA/Pitot probe is not included. This product is not EASA/FAA approved for installation in type-certificated aircraft. Installation suitability and any required approvals remain the responsibility of the installer and aircraft owner/operator.
Refer to the Dynon AOA, Pitot, Static Plumbing Kit Installation Guide and applicable Dynon system installation documentation before installation.