Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN6-11A
Bolt Undrilled AN6-11A
1.27 EUR/EA
Excluding VAT
Availability
20 EA ready to ship TodayOrder before 15:30 CET Today
AOG
AOG service might be available even outside our opening hours. AOG services incur a fee starting from 100 EUR.
Accept and see AOG contact details
Up to 93 EA ready to ship on Monday 2026-11-16Order before 15:30 CET Today
121 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN6-11A
- NSN
- 5306-00-180-1483
- Manufacturer
- 06804-5
- Manufacturer / Vendor
- AN6-11A
Product details
The AN6-11A is an undrilled hex-head aircraft bolt for applications requiring an AN6, 3/8-24 threaded fastener. The “A” suffix identifies an undrilled shank configuration, commonly selected for use with a stop nut where a cotter-pin hole is not required.
- Part number: AN6-11A
- Alternate part number: 06804-5
- Thread: 3/8-24
- Nominal length: approximately 31 mm, measured from beneath the head to the end of the shank
- Grip length: approximately 14 mm
- Recorded unit weight: 0.033 kg
- Unit of measure: each
Please verify the required bolt length, grip length, thread, head drilling requirement and applicable maintenance data before installation.
| Condition | NEW |
|---|---|
| Diameter | 0.374" - 0.371" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 0.563" |
| Length +.031" / -.016" | 1.203" |
| Locking Mechanism | None |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | 5 PER |
| Ref Pc Weight (lb) | 0.049 |
| Thread Length | 0.64" |
| Thread Specs | 3/8-24 UNF-3A |
| Unit Of Measure | EA |