Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN5-5A
Bolt Undrilled AN5-5A
0.63 EUR/EA
Excluding VAT
Availability
115 EA ready to ship TodayOrder before 15:30 CET Today
AOG
AOG service might be available even outside our opening hours. AOG services incur a fee starting from 100 EUR.
Accept and see AOG contact details
28,559 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN5-5A
- Manufacturer
- 10880-10
- Manufacturer
- 10880-5
- Manufacturer / Vendor
- AN5-5A
Product details
The Airfasco AN5-5A is an undrilled, hex-head alloy-steel airframe bolt. The “A” suffix identifies the undrilled shank configuration.
Manufacturer part number: AN5-5A
Additional manufacturer references: 10880-5, 10880-10
- Thread: 5/16-24 UNF-3A, rolled
- Nominal body diameter: approximately 7.9 mm
- Nominal length under head: approximately 18.2 mm
- Nominal grip length: approximately 4.8 mm
- Material: 4037 or 8740 alloy steel
- Finish: cadmium plated to AMS-QQ-P-416, Type II, Class 2
- Manufacturer data identifies conformance to NASM3 through NASM20.
Select this bolt by the complete AN5-5A designation and verify the required configuration, finish and installation requirements against the applicable approved maintenance or engineering data.
| Condition | NEW |
|---|---|
| Diameter | 0.312" - 0.309" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 0.188" |
| Length +.031" / -.016" | 0.719" |
| Locking Mechanism | None |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | 25 PER |
| Ref Pc Weight (lb) | 0.024 |
| Thread Length | 0.531" |
| Thread Specs | 5/16-24 UNF-3A |
| Unit Of Measure | EA |